Fixit Quik adheres to most surfaces. Best results will be achieved if area is first roughened by sanding or filing to clean and prepare surface.

Starts to harden 2 minutes after mixing. Repair should be in place before hardening starts.

A smooth finish can be obtained by rubbing with wet finger or damp cloth before hardening begins.

Fixit Quik can be drilled, filed, tapped sanded and  machined after one hour of curing (hardening).

Can be painted immediately, even before full hardening.

Fixit Quik can be used under water. Mix as usual  and use the polyethylene wrapper, so material will not stick to hands as the Fixit Quik is being forced  onto the wet surface.

Not recommended for use on polyethylene and  polypropylene.

Wash hands thoroughly with soap and water after using Fixit Quik.