A N T I - S E I Z E  &  L U B E S

PART #

PICTURE

DESCRIPTION

8901627

 
CASTLE® QT™
Disc Brake Silencer
Castle® QT™  is the fastest and most effective way to stop disc brake squeal. The high temperature and water resistant properties assure long term effectiveness. Use QT™ when brake squeal is present or when replacing pads.
Uses:
• Cars • Trucks • Motorcycles
Directions:
1. Spray the back of the pad with an even coat.
2. Allow QT™ to dry until it is sticky, but not wet.
3. DO NOT SPRAY ON THE FACE OF THE PAD
Packaging:
16oz  Aerosol   12/case

PART #

PICTURE

DESCRIPTION
8902093

 
META-SEAL
Brake Squeal Eliminator
CASTLE® META-SEAL™
Castle® Meta-Seal™ Brake Squeal Eliminator is a spray-on metalizing treatment designed to prevent brake noise at the source. Micro-fine aluminum particles form a molecular bond with rotor/drum friction surfaces to end annoying vibrations and brake squealing. Effective on all brake systems, Meta-Seal™ extends the life of the brake components. Benefits last for up to one year or 10,000 miles of average driving.
Uses:
• All Automotive Types • CFC Free • ABS Sensor Safe
• Effective from –60° F to 1200° F
Directions:
1. Perform complete brake job and thoroughly clean all surfaces.
2. Spray a light mist of Castle® Meta-Seal™ making sure not to saturate.
3. Apply directly to rotors/drums and pads/shoes.
4. Complete assembly and installation.
5. Apply brakes several times at low speed to burnish the Castle® Meta-Seal™ particles into the friction surfaces.
Packaging:
20 oz    12/case

 

PART #

PICTURE

DESCRIPTION
8902406

 
KLEENZ-OIL
Engine Degreaser

 CASTLE® KLEENZ OIL™  spray degreaser is formulated to quickly and easily remove grease and oil from all types of engines and equipment. Concentrated to penetrate and soften heavy deposits of oil, dirt, and sludge, Kleenz-Oil™ leaves a clean surface after rinsing. There’s no need for messy and costly mixing solvents or kerosene. It will not harm paint, rubber, or wiring when used as directed.


Uses   • Auto                 
            • Marine                                   
            • Factories           
            • Truck         
            • Lawn Mowers                      
            • Parts Cleaner
            • Aircraft       
            • Recreation Vehicles         
            • Heavy Equipment

Directions:
1.  Engine should be warm not hot.
2.  Ignition should be turned off.
3.  Remove air cleaner.
4.  Cover distributor cap with plastic (freezer or sandwich bags are ideal) or other 
      waterproof material. 
5.  Products can be applied using aerosol can or bulk product with low pressure
      spray tank.
 

PART #

PICTURE

DESCRIPTION

8911470

 
IES 2000
Anti-Seize Lubricant

 A special copper and graphite lubricant used to prevent seizing, galling, reduce friction and prevent corrosion. Withstands temperatures of 2000°F. Uses: brake parts, bolts, nuts, etc. Will not wash off. Excellent on frame machine bolts.
                                               
Packaging:   8oz. Brush Top Can   12/Case

PART #

PICTURE

DESCRIPTION
8914570

 
IES 2000
Anti-Seize Lubricant

 A special copper and graphite lubricant used to prevent seizing, galling, reduce friction and prevent corrosion. Withstands temperatures of 2000°F. Uses: brake parts, bolts, nuts, etc. Will not wash off. Excellent on frame machine bolts.

Packaging:   16oz Aerosol  12/Case

PART #

PICTURE

DESCRIPTION
89220210

 
ULTRA SLICK
Engine Assembly Lube

 PERMATEX® ULTRA SLICK Engine Assembly Lube Proper lubrication of metal mating surfaces is essential prior to starting a new or rebuilt engine. ULTRA SLICK‘ has superior adhesion to component surfaces to prevent scuffing and galling during initial start-up. Meets or exceeds OEM performance specs for engine assembly lubricants. Suggested Applications: Engine bearings, camshafts, lifters, valves, guides and rocker shaft assemblies.

Packaging   16oz

PART #

PICTURE

DESCRIPTION
892700015

 
ATE
Plastilube

ATE PLASTILUBE BRAKE COMPONENT GREASE

Ate plastilube is a clear, high temperature grease designed for braking components. Apply to caliper slide pins, pad backing plate to carrier contact areas and pad backing plate to caliper contact areas to prevent brake squeal. Do not apply to pad friction face or brake disc. Also works great for window regulators, sunroof mechanisms, plastic gears and other parts.

Packaging:   75ml Tube

 

PART #

PICTURE

DESCRIPTION
89281950


ULTRA SLICK
Engine Assembly Lube

 PERMATEX® ULTRA SLICK Engine Assembly Lube Proper lubrication of metal mating surfaces is essential prior to starting a new or rebuilt engine. ULTRA SLICK‘ has superior adhesion to component surfaces to prevent scuffing and galling during initial start-up. Meets or exceeds OEM performance specs for engine assembly lubricants. Suggested Applications: Engine bearings, camshafts, lifters, valves, guides and rocker shaft assemblies.

Packaging   4oz

PART #

PICTURE

DESCRIPTION
893558


Dynatex Anti-Seize and Lubricating Compound

 A heavy-duty economical industrial anti-seize lubricant that contains finely divided metallic particles in a special no melt petroleum base grease. Prevents carbon fusion and seizure up to 2000°F(1093°C). Protects against corrosion between dissimilar metals. Resists water, salt solution, most shop and automotive fluids. Reduces coefficient of friction by a minimum of 20%. "76732 Loctite  ® Functional Equivalent"

Packaging   8oz Brushtop

 

PART #

PICTURE

DESCRIPTION
893560


Dynatex Anti-Seize and Lubricating Compound

 A heavy-duty economical industrial anti-seize lubricant that contains finely divided metallic particles in a special no melt petroleum base grease. Prevents carbon fusion and seizure up to 2000°F(1093°C). Protects against corrosion between dissimilar metals. Resists water, salt solution, most shop and automotive fluids. Reduces coefficient of friction by a minimum of 20%. "76732 Loctite  ® Functional Equivalent"

Packaging   16oz Brushtop

PART #

PICTURE

DESCRIPTION
893576


Dynatex Aluminum
Anti-Seize
 

Prevents carbon fusion and seizure up to

2000°F(1093°C). Protects against corrosion

between dissimilar metals. Resists water, salt

solution, most shop and automotive fluids.

Reduces coefficient of friction by a minimum of

20%. "76732 Loctite® functional equivalent"

PART #

PICTURE

DESCRIPTION
893661


Dynatex Disc Brake Quiet

 Dynatex disc brake quiet forms a water resistant, high-temperature film that absorbs noise while quieting squeaks and squeals

Compatible with anti-lock brake systems

Eliminates disc brake squeal

Protects against corrosion

For use on all cars and trucks

Packaging   4oz Squeeze Bottle