ULTRA-FINE BUMPER REPAIR TEXTURE COATING
RUST-RAIDER / METAL-ETCH
|8911820-K30||BEDLINER PLUS 2K
LOW VOC BLACK URETHANE BEDLINER KIT
BEDLINER PLUS! is a two component textured coating
Tough Durable Coating:
1 - quart can each :
24 fl. oz. Bedliner Part A
6 fl. oz. Activator Part B
Gun Included(150 fl oz. kit only)
5 - quart can filled with 24 fl. oz. Bedliner Part A
1 - quart can filled with 32 fl. oz. Activator Part B
|8902401||CASTLE® Z-3™ Undercoat
with Sound Deadener
Castle® Z-3™ is a heavy duty, non-paintable undercoat and sound deadener.
This is a low cost way to re-coat fender walls and undercarriage.
Z-3™ exceeds US Government specifications for undercoating (TT-C-502A).
Z-3™ provides superior protection against salt corrosion.
Avoid application of undercoating closer than 12 to 14 inches from entire exhaust system.
Tree Wound Dressing
Wood Fence Post Preserver
Eaves, Troughs & Flashing Sealer
|8902402||CASTLE® RUBBERIZED UNDERCOATING
Castle® Rubberized Undercoating is a tough, fast-drying,
abrasion resistant coating recommended for areas
that must be painted over. Rubberized Undercoating
dries thoroughly, yet remains pliable enough not to
crack when metal flexes. Surface can be painted in
about 10 minutes. Several thin coats are more
effective than one thick coat. Avoid application
of materials closer than 12 to 14 inches to the
entire exhaust system and catalytic converter.
Multi-purpose undercoating may be applied to cars, truck and recreational vehicles
Extra smooth, easy to spread. Tack free.
Unparalleled adhesion properties. Resistant to solvent in 15-20 mins. Very easy sanding. Direct to metal.
Ultra premium 2-part polyester finishing putty with all of the high quality features of BS-C, Skim Coat, plus
extra-flow and ultra smooth & creamy. Levels after application for optimum smooth pinhole free final finish.
Includes 1 fl oz hardener.
|32 fl oz|
|INTER-COAT is a rust preventive urethane coating
formulated to apply directly on rusted metal,
properly prepared bare metal, aluminum,
galvanized steel, stainless steel,
fiberglass and concrete.
Drys to a hard, tough yet flexible
non-porous finish. Will not crack,
peel or chip. Permanently seals out
moisture to prevent rust from occurring.
Ferrous metal will not rust if you can
keep moisture away from it. When used as
directed INTER-COAT provides a non-porous
barrier that encapsulates the surface to
protect against moisture, chemicals and
INTER-COAT is UV sensitive. For
applications directly exposed to
ultraviolet light, INTERCOAT should
be topcoated with a UV protective coating.
Rust Preventive Urethane Coating
Seals Out Moisture
May Be Applied Directly Over Rus t
Will Not Crack, Chip Or Peel
Dries Super Hard, Tough, Yet Flexible
|Qt Can Black|
|Qt Can Gray|
17-3/4 floz Aerosol
|Rustproofing Amber Coat|
An easy-gunning, fast curing, high viscosity windshield
adhesive & sealant for replacement of bonded glass.
It stays where you put it and will not run off or squeeze
out after glass installation. Use 8911515 Urethane Cleaner
Activator on pinch weld and glass areas to be bonded and
then prime with 8911516 Urethane Primer Black to ensure a proper bond. (Refer to technical data sheet for specific
instructions.) Meets MVSS 212 & 216 specifications when
used in conjunction with 8911515 Cleaner and 8911516 Primer. Powerful adhesion to glass, metal and all factory installed sealants.
10.3 floz Foil Pouch
A one component polyurethane sealant formulated
for a wide variety of bonding and sealing
applications for the Automotive, Transportation,
Marine and RV Industries. Do not use for windshield
or backglass installations.
Tremendous strength and adhesion. Tack free time: 15-25 minutes. Paintable in 15 minutes. Adheres to: Steel, aluminum, fiberglass, SMC, most plastics, wood & concrete. Non-corrosive to metallic substrates. Ideal for Uni-body type vehicles. May be brushed for OEM look.
||Spectrum Siphon Gun
||18:1 Ratio Caulk Gun|
||Mini Intermix Gun|
||Salami Pack Gun|