LOCTITE   PRODUCTS

30ml Yellow
  		892324

#324 LOCTITE Speedbonder
Structural Adhesive, High Impact

 
LOCTITE® 324 Speedbonder Structural Adhesive is a high impact, toughened, two step acrylic, no mixing required, amber, multi-surface structural adhesive.

LOCTITE 324 is solvent resistant and, when used in conjunction with LOCTITE
Primer 7075, is ideal for large gap applications.

LOCTITE 324 offers the strength of an epoxy and the speed of an instant, fixturing in 5 minutes
 

30ml Amber
  		892325

#325 LOCTITE Speedbonder
Structural Adhesive, High Temperature

LOCTITE® 325  Speedbonder Structural Adhesive is a high temperature, two step acrylic, no mixing required transparent brown adhesive.

LOCTITE 325 is solvent resistant and, when used in conjunction with LOCTITE Primer 7075, forms flexible bonds on gaps up to 0.40".

Designed for severe environments and temperatures to 350F, LOCTITE 325 fixtures in 5 minutes.

Magnetic bonding structural adhesive


(10) 1oz Cups Gray
  		89244581

Permatex® Fast Cure Epoxy

Convenient pre-measured epoxy mixer cups contain resin and hardener in one convenient package.

No guess, no mess, no waste.

Ideal for bonding glass, hard plastics, rubber and metal.

Bonds in 5-15 minutes, useable in 30 minutes.

Grey adhesive has excellent chemical resistance.

Fills porosities and can be used to build up worn parts.

May be drilled, tapped, sanded, or machined and painted after cure.
 

4gm
  		89245209

LOCTITE Super Glue Gel

LOCTITE® Super Glue ULTRA Gel Control™ is a specially formulated rubber toughened instant adhesive that resists impact, shock, vibration and temperature extremes.

It is ideal for bonds subject to daily use and harsh conditions.

The Rubber Toughened Formula is also Outdoor Safe and gives more time to align pieces before the glue takes hold.

LOCTITE® Super Glue ULTRA Gel Control™ comes in a patented side-squeeze design for maximum control and air-tight storage.

It dries clear and sets without clamping.

LOCTITE® Super Glue ULTRA Gel Control™ is resistant to moisture and freezing temperatures.

  • Rubber toughened formula
  • Great for applications requiring high flexibility
  • Gel formulation
  • No mess, no drip formula; Ideal for  vertical applications
  • Dries transparent
  • Invisible repairs
  • Sets in seconds
  • No clamping required
  • Easy squeeze grips
  • Pinpoint accuracy, easy to use
  • Locking cap collar
  • Prevents leaks and drying out
     

50ml Red
  		892515

#515 LOCTITE
Gasket Eliminator Flange Sealant

  • Chemical Base: Methacrylate
  • Maximum Operating Temperature: +300 °F
  • Cure Time: 24 hr
  • Material Compatibility: Metal
  • Product Form: Liquid
  • Package Type: Tube
  • Package Size: 50 ml
  • Shear Strength: 725 psi
  • Tensile Strength: 2030 psi
  • Minimum Operating Temperature: -65 °F
  • Color: Purple
  • Viscosity Class: High Viscosity
  • Viscosity Measurement: 150000 to 375000 MPaS
  • Storage Condition: Store Between 46°F to 82°F

50ml Red
  		892518

#518 LOCTITE
LOCTITE 518 Gasket Eliminator Flange Sealant


Medium-strength, general purpose gasketing product - excellent contamination tolerance.

Ideal for use on casted iron, steel and aluminum flanges.

LOCTITE® 518 cures when confined in the absence of air between close-fitting metal surfaces.

It is an anaerobic gasketing material designed for use on rigid iron, aluminum, and steel flanged mating surfaces.

Fills gaps up to 0.25mm and forms a flexible, chemical-resistant seal that will not tear or decay.

Parts disassemble easily, even after extended service.

Typical applications include sealing close-fitting joints between rigid metal faces and flanges.

It is also used as a formed-in-place gasket on rigid flanged connections, e.g. transmissions and motor housings.

  • Higher strength on contaminated surfaces
  • Better flexibility and improved adhesion
  • Enhanced sealing capability
  • Improved gap cure
  • High performance on passive metals without an activator

Your benefits

  • Semi-flexible, medium-strength anaerobic flange gasket
  • For active and inactive rigid metal flanges
  • Cures through minor surface contamination
  • Adapts to flange surface irregularities and gaps up to 0.25 mm
  • Gel-type consistency
  • Seals instantly against low pressure
  • Reduces inventory costs – no need for large inventory of cut gaskets
  • Resists high pressure when fully cured
  • No compression set or misaligned gaskets
  • Easy to automate
  • Reduces process costs – eliminates manual assembly of conventional gaskets
  • NSF P1 Reg. No. 123758

50ml Orange
 

892574

#574 LOCTITE  
Gasketing Product general purpose.

Ideal for use on machined and rigid metal flanges.

Seals close-fitting joints between rigid metal faces and flanges. 

The product cures when confined in the absence of air between close-fitting metal surfaces.

It provides resistance to low pressures immediately after assembly. 

Typically used as a form-in-place gasket on rigid flanged connections.

The nature of LOCTITE 574 reduces the migration of liquid product after application to the substrate.  

It has a high oil tolerance and excellent water and glycol resistance.
 

 11oz Black
  		89259875

#598 ULTRA BLACK

Permatex ® gasket makers offer significant performance advantages which include outstanding oil resistance, excellent torque retention and hi-temp sensor-safe properties.

Extended warranties, engine sensors and new component materials such as aluminum, bi-metal alloys and high-tech plastics, have created the need for superior RTV silicone gasket makers in both OEM production and service applications.

OEM specified. For dealership warranty requirements, Ultra Black ® ensures extended drive train warranty compliance.

Fast-curing formula. Sensor-safe, low odor, noncorrosive.

Meets performance specs of OE silicone gaskets. flexibility, oil resistant properties through use of a patented adhesion system.

Temperature range -65°F to 500°F  -54°C to 260°C  intermittent.  Resists auto and shop fluids and vibration.
 


10ml Green 		892648

#648 LOCTITE
Retaining Compound

LOCTITE® 648 is designed for the bonding of cylindrical fitting parts.

The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration.

It exhibits a robust curing performance.

The product also works on passive substrates and offers high-temperature performance and good oil tolerance.

Your benefits

  • High temperature resistance
  • Proven to be tolerant of minor contamination due to industrial oils
  • High strength on all metals, including passive substrates (e.g. stainless steel)
  • Ideal for retention of parts with a clearance or interference fit
  • P1 NSF Reg. No.: 148350
  • DVGW Approval (EN 751-1): NG 5146C00236
  • WRAS Approval (BS 6920): 0808532

36ml Blue
  		893243

#243 LOCTITE
Threadlocker

Medium Strength

Works on all metals,
Improved temperature resistance,
Improved oil tolerance.

Break torque:26N.m（230lb.in)
Prevail torque:5N.m（40lb.in)

LOCTITE® 243 is long recognized as industry’s leading medium strength threadlocker.

And now, the product capabilities of LOCTITE® 243 have been enhanced to offer improved high temperature performance and to cure through light oil contaminations  while maintaining a very reliable cure on passive metal surfaces

Typical applications: Replaces LOCTITE 242 and the current LOCTITE 243 formulations.
 


19gr Blue
 		 893248

#248 LOCTITE
Quickstix

Top Pick LOCTITE® 248™ Semi Solid Stick Medium Strength Blue Threadlocker is a anaerobic threadlocking material.

It is supplied as a wax-like semi-solid, conveniently packaged in a self-feeding stick applicator.

LOCTITE 248 Stick is the ideal general purpose threadlocker for all nut and bolt applications.

Now primerless and oil-tolerant.
 


19gr Red 		893268

#268 LOCTITE
Quickstix

Top Pick LOCTITE® 268™ Semi Solid Stick High Strength Red Threadlocker is a high strength anaerobic threadlocking material.

It is supplied as a wax-like semi-solid, conveniently packaged in a self-feeding stick applicator. 

Now primerless and oil-tolerant.

Eliminates loosening from vibration, shock & thermal expansion.

More reliable and cost effective than conventional mechanical fasteners.

Prevents rust & corrosion while sealing and protecting threads.

Requires localized heat and hand tools for removal.

Fixture time is 10 minutes and full strength cure is 24 hours.
 


50ml
 

89337393

#37393
Plastix® Plastic Bonder

LOCTITE® Plastix® Advanced Plastic Bonder advanced automotive aftermarket plastic repair.

No mixing required.

Prepare the surface with the activator, apply the bonding agent, and bond the parts.

Suggested applications: All plastics, even polyethylene and polypropylene.
 

8oz
 		 89338725

#38725 LOCTITE
Thread Treatment Stick
Assortment Pack

Solid performers with a twist!

Set includes one each of the following sticks:
19 gm Medium Strength Thread locker
19 gm High Strength Thread locker
19 gm PST Pipe Sealant
20 gm Copper Anti-Seize Stick
20 gm Silver Anti-Seize Stick

Features:
Convenient: small enough to be Inch pocket friendly
No leaks, drips or spills
Keeps workbenches and hands clean
Fast and easy to apply
Solid formula: great for overhead use
Functional for a full range of uses
 

190 ml Aerosol
 		 89340505

#5699™ LOCTITE

LOCTITE® Grey High Performance RTV Silicone Gasket Maker

Designed for flange sealing with excellent oil resistance on rigid flanges. 

Sensor-safe, low odor, non-corrosive.

Outstanding oil resistance.

Ideal for use on high-torque applications.

Applications include: gearbox covers, valve covers, pumps, compressors, oil pans, thermostat housings ,and water pumps.
 

8oz Clear
 		 893408

#408 LOCTITE
Prism® Instant Adhesive

Low odor and low blooming properties is particularly suitable for applications where vapor control is difficult.

The product provides rapid bonding of a wide range of materials, including metals, plastics and elastomers.

LOCTITE® 408™ Prism® Instant Adhesive is particularly suited for bonding porous or absorbent materials such as wood, paper, leather and fabric.

Benefits

High cosmetic appearance
Low odor
Reduced white residue “blooming” or “frosting”
Surface insensitive
One-part room temperature cure


Substrates and Applications

ABS to polycarbonate
Battery cases Aluminum to acrylic
Cosmetic cases Polypropylene to aluminum Identification tags/labels
Clear plastic to PVC – Display systems
Wood to ABS
Fountain pens
Rubber to metal
Gasketing and sealing
Stainless steel to rubber
Electronic housings
SS clips to plastic
Handheld electronics
ABS to polystyrene
 Small appliances

Technical Data

Fixture time: 5 – 10 sec. Color: colorless transparent Suited for plastics Suited for polyolefin’s in combination with Primer
LOCTITE 770 or LOCTITE 7239
Suited for rubbers
Suited for metals
Well suited for porous and/or acidic surfaces

LOCTITE EQUIVALENT PRODUCTS

1oz Black 		892380
  		#380 LOCTITE Toughened Instant Adhesive
(Known as LOCTITE 380 Black Max )

LOCTITE® 380 Toughened Instant Adhesive low viscosity, black, rubber toughened, one part, room temperature cure, instant adhesive designed for close fitting parts and bonding metal, rubber and selected plastics. Excellent peel, impact and sheer strength.

Black, low viscosity, rubber-toughened,
1-part, room temperature cure, instant adhesive.

Your benefits

  • Easy to use

  • Toughened

  • Low viscosity

  • Excellent peel, impact and sheer strength


6ml Blue
LOCTITE # 2421
 

8932421

DYNATEX
Threadlocker

Medium Strength

Blue Threadlocker is a general purpose, removable threadlocker for fasteners between
¼" and ¾" (6 to 20 mm) diameters.

Controlled lubricity for accurate clamp loads.

Parts can be separated using hand tools


24ml Blue
LOCTITE # 242
  		893242

250ml Blue
LOCTITE # 2422
  		8932422


6ml Red 
 

 8932711

DYNATEX
Threadlocker

Medium Strength

Blue Threadlocker is a general purpose, removable threadlocker for fasteners between
¼" and ¾" (6 to 20 mm) diameters.

Controlled lubricity for accurate clamp loads.

Parts can be separated using hand tools


24ml Red
  		893271

250ml Red
  		8932712

6ml Green
 		 893290

#290 LOCTITE
Boltlocker

Medium-High Strength
Wicking Style
 

Top Pick LOCTITE® 290™ Wicking Grade MIL-SPEC Medium-High Strength Green Threadlocker is a medium strength wicking threadlocker for pre-assembled bolts up to 1/2" (12 mm).

Penetrates threads by capillary action.

Secures set screws and other assemblies after settings are completed.

Seals welds and porous metal parts.
 

50ml
 		 893446

#446

Dynatex® Threadlocker Gel is a medium strength anaerobic threadlocking material, which cures between engaged threads to form a unitized assembly that resists virtually all leakage, shock and vibration.

Dynatex® Threadlocker Gel Pump outperforms leading gel and stick products in the marketplace!

Easy to use self-metering pump eliminates waste, stays where it is applied and will not run; no mess; easy cleanup.

Just wipe Nozzle with clean rag and close cap. Use on cup and core plugs, starter mounting bolts, alternator mounting bolts, intake manifold bolts and more....

"248 LOCTITE® functional equivalent"
 

50ml		 893456

#456 THREADLOCKER GEL

Dynatex® Red High Strength Super Threadlocker Gel is a high strength anaerobic threadlocking material, which cures between engaged threads to form a unitized assembly that resists virtually
all leakage, shock and vibration. It is ideal for all 1/4 inch to 1 inch diameter nut and bolt assemblies where future disassembly is improbable. Excellent chemical resistance with a temperature resistance range of -75°F to 300°F  (-59°C to 149°C). Fixture tight in minutes. Protects against thread corrosion.

"268 LOCTITE® functional equivalent"
 

24ml		 893602

#640 SLEEVELOCKER GREEN
Medium Viscosity

Dynatex Green High Strength Boltlocker is a high strength anaerobic threadlocking material that cures between engaged threads to form a unitized assembly that resists virtually all leakage, shock and vibration. Because of its low viscosity and capillary action, the product wicks between engaged threads and eliminates the need to disassemble, apply product and then reassemble. The high prevailing torque provides vibration resistance to adjustment screws. Ideal for all threaded engagements less than or equal to 1/4 inch in diameter. The product can also fill porosity in welds, castings and powder metal parts. Excellent chemical resistance with a temperature resistance range from -65°F to 350°F (-54°C to 177°C)