POLYFIX

 

PART # PICTURE DESCRIPTION
892001

POLYFIX KIT

2oz GLUE

Polyfix Cyanoacrylate Adhesive adhesive are single component "instant curing" solvent free adhesives. They have been designed to cure by reacting to small traces of surface moisture at room temperature. Fast and easy to apply, these adhesive do not require any mixing or heating prior to the use. Only application of contact pressure is required to obtain high performance bonds. The Cyanoacrylate Adhesive performs best when applied as a thin film between
two surfaces.

Very Quick Setting: Sets almost in seconds with very strong bonds

Versatile: Able to bond a wide range of assembly materials like rubbers, metals, plastics, ceramic, stones, and hard wood

No need of heating or mixing

Cost Saving: Due to minimal consumption our cyanoacrylate adhesive saves a lot on the cost per unit. It doesn't require mechanical fasteners,
expensive clamps, jigs, nails and fittings.

2oz ACCELERATOR

Polyfix™ Accelerator is non-flammable and less then 10% degrade when applied comparing to methanol
and acetone accelerator that has 13/15% degrade.

This accelerator allows a quick cure by enhancing the alkaline conditions during polymerization. POLYFIX™
is normally used to cure the cyanoacrylate adhesive that flows from joints or cracks when parts are pressed together. Apply an additional bead of thick ca along seam and then curing with POLYFIX™ significantly in enhances a crack's strength. For difficult to bond material,
Polyfix™ can be applied to one surface and ca to the opposite surface. When brought together,
they will bond instantly.

 

8921000

Zero Shrinkage

POLYFIX GLUE KIT

FAA approved -
Polyfix™ has been in use in the Aviation Industry for over 15 years! Race proven in CART, NHRA, USAC and SCCA, POLYFIX™ is fast
and reliable!

Polyfix's™ patented 3 part system combines an Industrial Strength Cyanoacrylate Glue, Catalytic
Filler and Accelerator. Chemical reaction of the
system heats the repair to 142 deg. F, fusing to
the parent material.

Professional Auto Body Shops have been using Polyfix
for years, producing fast, reliable and cost effective repairs on all automotive plastics - interior panels, dashboards, body panels, grilles, bumper covers, and air dams.

High Tech Composite Repair developed for the Aerospace Industry is now available for Auto -RV - Boat & Home Repairs. Polyfix
easily repairs ABS, SMC, PVC, CVPC, Vinyl, Acrylic, Kevlar, Graphite Composite, Plexiglass, Fiberglass, Polycarbon,
Nylon & MUCH MORE!

Polyfix
kits contain everything required to complete repairs in minutes with no messy resins or epoxies.
The kits are sized by the linear inch of average total crack repair.  Each kit contains complete instructions.

Kits include
Polyfix™ Industrial chemical, polydust, gloves, finger cots, fiberglass mat, protection hand cream, no mixing tools, and an easy to follow instruction manual.
 

892119

POLYFIX™ ACCELERATOR
2oz Bottle

Polyfix Accelerator is non-flammable and less then 10% degrade when applied comparing to methanol
and acetone accelerator that has 13/15% degrade.

This accelerator allows a quick cure by enhancing\
the alkaline conditions during polymerization.\
Polyfixis normally used to cure the cyanoacrylate adhesive that flows from joints or cracks when parts
are pressed together. Apply an additional bead of\
thick ca along seam and then curing with
Polyfix significantly in enhances a crack's strength. For\
difficult to bond material,
Polyfix can be applied to one surface and ca to the opposite surface. When brought together, they will bond instantly.
 

892120

POLYFIX™ GLUE SPARE TIP

892123

POLYFIX™ GLUE
1oz Bottle


Polyfix™
Cyanoacrylate Adhesive are single component "instant curing" solvent free adhesives. They have been designed to cure by reacting to
small traces of surface moisture at room temperature. Fast and easy to apply, these adhesive do not require any mixing or heating prior to the use. Only application of contact pressure is required to obtain high performance bonds. The Cyanoacrylate Adhesive performs best when applied as a thin film between two surfaces.

Very Quick Setting: Sets almost in seconds with very strong bonds

Versatile: Able to bond a wide range of assembly materials like rubbers, metals, plastics, ceramic, stones, and hard wood

No need of heating or mixing

Cost Saving: Due to minimal consumption our cyanoacrylate adhesive saves a lot on the cost per unit. It doesn't require mechanical fasteners,
expensive clamps, jigs, nails and fittings.
 

892127
 

POLYDUST™
10-dram Bottle

Catalytic filler

892134

POLYFIX™ DEBONDER
1oz Bottle

Will soften cured cyanoacrylate adhesive. If parts are bonded incorrectly or your fingers are stuck together
a few drops of
Polyfix™
debonder. Will dissolve the cyanoacrylate adhesive in about a minute. Apply on bonded skin and roll apart fingers. Once unstuck, use Acetone to clean off softened cyanoacrylate adhesive then wash off with soap and water Polyfix™ debonder will easily remove the adhesive residue.