SUPERLUBE

Super Lube® Air Tool Lubricant

Super Lube® Air Tool Lubricant is formulated to meet the special requirements of industrial, commercial, household and agricultural tools.

It lubricates, absorbs water and minimizes ice buildup and frost in air tools.

Blended rust and corrosion inhibitors and a synthetic base fluid oil reduce wear and allow operation of air tools at temperatures as low as -40°F.
 

Super Lube® Engine Treatment

Super Lube® Engine Treatment combines the special low friction qualities of Syncolon® (PTFE) in a synthetic base oil that bonds with the cylinder walls and bearing surfaces to substantially reduce wear.

It is an effective treatment for all metal surfaces and can be used in both diesel and gasoline engines.

It protects your engine during cold starts when even the best motor oils are not effective.

It is non-toxic, biodegradable and environmentally safe

 It reduces engine wear and can be used in applications other than the engine.
 

Super Lube® Silicone Lubricating Grease

Super Lube® Silicone Lubricating Grease with Syncolon® (PTFE) has a wider operating temperature range than most petroleum based greases and is compatible with the major rubber and plastic compounds.

Super Lube® Silicone Lubricating Grease is ideal for lubricating o-rings and seals when the rubber compound is not known.

Super Lube® Silicone Lubricating Grease will not harden, dry out or melt.
 

Super Lube® Multi-Purpose Aerosol

Super Lube® Aerosol with Syncolon® (PTFE) is a multi-purpose lubricant, consisting of Super Lube® Grease in a solvent carrier, that cleans and penetrates the components to be lubricated, then the solvent evaporates leaving behind a film of synthetic grease which provides long lasting lubricant protection.

Super Lube® Aerosol with Syncolon® (PTFE) is USDA/NSF listed, rated H-1 for use in federally inspected meat and poultry plants.
 

Multi-Purpose Synthetic Grease

Super Lube® Grease is a patented synthetic, multi-purpose lubricant with Syncolon® (PTFE).

Synthetic base fluids and the addition of PTFE micro powders combine to form a premium lubricant that provides protection against friction, wear, rust and corrosion over a temperature range of -45°F to +450°F.

Super Lube® Grease is a USDA/NSF listed Food Grade lubricant NLGI-2, rated H-1 for incidental food contact, and will not run, drip, melt or separate.

Compatible with most other lubricants,
Super Lube® outlasts conventional greases 3–4 times.
 

Super Lube® Oil with PTFE (High Viscosity)

Super Lube® Oil with Syncolon® (PTFE) is a blend of premium synthetic PAO oil, Mineral oil, PTFE micron sized powder and powerful additives that provide superior lubrication protection against friction, wear, rust and corrosion.

Machinery lasts longer, downtime is reduced, and productivity is increased.

Super Lube® Oil with Syncolon® (PTFE) is safe on metal, rubber, plastic, wood, leather, fabric and painted surfaces.

It is USDA/NSF listed H-1 for incidental food contact.
 

Super Lube® High Temperature, Extreme Pressure Grease

Super Lube® High Temperature, Extreme Pressure Grease is an
NLGI -2 grease for use in those applications that require a higher concentration of Syncolon® (PTFE) and a temperature range from -30°F to +475°F.

It is ideal for use in manufacturing facilities where higher performance and extended service life are critical lubricant requirements.

Super Lube® High Temperature, Extreme Pressure Grease is a USDA/NSF listed Food Grade lubricant, rated H-1 for incidental food contact.