TIRE REPAIR

CAPS

PART NO.

 PICTURE DESCRIPTION
8791370 100pcs
 		 DOME TYPE VC-8 PLASTIC
8791371
 		 DOME TYPE HI-TEMPERATURE METAL
8791372 100pcs
 		 STANDARD TPMS GREY CAP
8791373 100pcs
 		 TALL TPMS BLACK CAP
8791374 100pcs
 		 NITROGEN CAPS GREEN PLASTIC with SEAL

879PRO
TPMS UPRO VALVE SET
315/433mhz

 TPMS UPRO VALVE SET 315/433mhz

Features and Benefits

    Programs in 1-3 seconds- fastest programming sensor in the marrket
    Two sku's for reduced inventories
    Compatibility with over 90% of the current TPMS enabled vehicles
    115 psi/8 Bar Max Pressure
     Market leading 3-year sensor warranty,
    2 year valve warranty and 7-year battery life span

    U-Pro Hybrid technology is built with preloaded sensor protocols so the TPMS
    diagnostic tool can simply activate’ the selected vehicle protocol.
    This results in the tool allowing the sensor to be configured in 1-3 seconds.
     

CHEMICALS

PART NO.

 PICTURE DESCRIPTION
87914-100 1qt
 

RUBBER PREP BUFF CLEAR

Used for removing dirt, debris and mold lubricants from the repair area prior to buffing
87914-032 32oz
 		 VULCANIZING CEMENT

For chemical or heat vulcanization. The flammable vulcanizing cement is X-tra Seal's most popular, fast dry cement. For use with any X-tra Seal repair unit or insert. When used on large reinforced patches, coat patch and inner liner with cement.
 
879511
FLAMMABLE		 8oz
 

SUPER FAST DRYING CEMENT

For use with all patches and plugs
879513

NON
FLAMMABLE
879735 1qt
 		 X-TRA SEAL BEAD SEALER

X-TRA Bead Sealer helps to prevent leaks between the tire bead and rim.
879735HD
 Heavy Duty

PART NO.

 PICTURE DESCRIPTION
8901627 16oz Castle® QT™ disc brake silencer is the fastest and most effective way to stop disc brake squeal.

The high temperature and water resistant properties assure long term effectiveness.

Use QT™ when brake squeal is present or when replacing pads.

Uses:  Cars - Trucks - Motorcycles

Directions:

1.  Spray the back of the pad with an even coat.

2.  Allow QT to dry until it is sticky, but not wet.

3.  DO NOT SPRAY ON THE FACE OF THE PAD.
 
8902009 20oz Castle® Hug™ tire bead sealer is a fast, easy, and dependable aerosol designed to eliminate troublesome bead leaks, on radial tires.

Hug™ creates an airtight seal where the bead and rim meet, and is particularly effective in preventing bead leaks on tires that have been stored for a period of time.

It is excellent for mounting new tires or remounting old tires, and will not harden or cause difficult removal.

Uses:  Mounting Tires - Removing Tires


 
Directions:
1. Clean rust and foreign matter from area on rim where tire bead will make contact.
 
2. Hold can 6 to 8 inches from surfaces and spray entire bead.
 
3. Continue mounting tires.
 
4. After spraying, clean spray head and extension tube by turning upside down and spraying until only pressure escape.

 


 
8902093 20oz Castle® Meta-Seal™ Brake Squeal Eliminator is a spray-on metalizing treatment designed to prevent brake noise at the source. Micro-fine aluminum particles form a molecular bond with rotor/drum friction surfaces to end annoying vibrations and brake squealing. Effective on all brake systems, Meta-Seal™ extends the life of the brake components. Benefits last for up to one year or 10,000 miles of average driving.
Uses:
All Automotive Types
 		 CFC Free  ABS Sensor Safe
Effective from –60° F to 1200° F
Directions:
1. Perform complete brake job and    thoroughly clean all surfaces.
 
2. Spray a light mist of Castle® Meta-Seal™ making sure not to saturate.
 
3. Apply directly to rotors/drums and pads/shoes.
 
4. Complete assembly and installation.
 
5. Apply brakes several times at
low speed to burnish the Castle®
Meta-SeaL™ particles into the friction surfaces.
 

PART NO.

 PICTURE DESCRIPTION
8904005
5gal
 		 Echo Aluminum Cleaner is a biodegradable, multi-purpose acid cleaner formulated to clean
wheel covers, trucks, boats, or porcelain or fiberglass toilet bowls.
It will also brighten aluminum and wire wheels.

Directions:

1. Apply Echo Aluminum Cleaner  with a brush or spray bottle, onto  a wet surface.

2. Work brush until a lather appears.

3. Rinse from top to bottom before it dries.

4. Use nylon cleaning pad on wheels, where  surface is badly pitted.
 
89040128
Gal
89072128 Gal
Castle® White Wall™ is a high alkaline cleaner with a
blend of surfactants for heavy duty cleaning. This fast-acting formula dissolves grease, grime, and dirt, while protecting white walls from yellowing. Do not spray on aluminum or magnesium wheels. Lemon scented.
Uses:
White Wall Tires Black Wall Tires
Directions:
1. Wet the tire.
 
2. Spray on.
 
3. Brush with stiff bristle brush.
 
4. Hose off.
 
5. Do not apply full strength to aluminum or magnesium wheels. Dilute 2 oz. per 16 oz
of water.
 
6. Wet wheel first.
 
7. Apply diluted cleaner.
 
8. Brush with soft bristle brush.
 
9. Rinse. Do not let mixture sit for long periods of time.
89085128 Gal

 
Econo Tire Mount lubricant is formulated for quick and efficient tire mounting and dismounting. Tire Mount cleans, degreases, and lubricates beads and rims for ease of mounting. It keeps rims and rubber flexible and moist between mountings. Tire Mount does not require any mixing. It contains no soap or silicone so that proper seating is assured.
Uses:
Mounting and dismounting tires
Radial Tire Mounts
Directions:
1. Spray or brush onto rims.
 
2. Continue mounting tire.

8922480 25#
Black-Ice mount demount tire lube. Eases tire mounting and demounting. Petroleum base compound. Contains low VOC's.  Prevents rim and bead from bonding.

Manufactured in the usa.
Uses:
Mounting and dismounting tires
Protects against rim rust
and corrosion.
 

PART NO.

 PICTURE DESCRIPTION
8911470 8 floz Brush-Top
 

IES-2000 ANTI-SEIZE LUBRICANT

A special copper and graphite lubricant used to prevent seizing, galling, reduce friction and prevent corrosion.

Withstands temperatures of 2000°F. Uses: brake parts, bolts, nuts, etc.

Will not wash off.

Excellent on frame machine bolts.
8914570 16 floz
 
8921208
8-lb Tub
 

REMA TIP TOP TIRE  MOUNTING COMPOUND

Tire Mounting Compounds contain rust inhibitors and will not separate or liquefy. These versatile components function as an excellent tire lubricant and for tire bead packing.

Proper application provides damage free  removal of tires.

Concentrated, water soluble, can be diluted.

Honey Color
 

PART NO.

 PICTURE DESCRIPTION
89275
8-lb Tub
KEX TIRE & TUBE MOUNTING COMPOUND

Use KEX products for fast and easy mounting and demounting of ALL TYPES OF TIRES.

The use of KEX Paste Lubricants and Mounting compounds prevents bead damage to tires.
89275W
New Style
8929619
1qt
 

LEAK DETECTOR

Best leak detection liquid in the industry.

Makes finding pin holes and leaks easy.
89320353
2oz
 		 ULTRA DISC BRAKE CALIPER LUBE

A green, non-melting, synthetic lubricant formulated to lubricate under the most adverse brake conditions.

Assures that critical caliper pins, sleeves, bushings and pistons remain lubricated throughout pad life.

From special-mission, job-specific lubricants, protectants and dressings, to the rigors of heavy-duty needs, count on Permatex to bring you reliability and problem-solving solutions that extend the life of your equipment.

Suggested Applications: Caliper pins, sleeves, bushings and pistons

PART NO.

 PICTURE DESCRIPTION
893558
8oz
 		 ANTI-SEIZE & LUBRICATING COMPOUND

A heavy-duty economical industrial anti-seize lubricant that contains finely divided metallic particles in a special no melt petroleum base grease.

Prevents carbon fusion and seizure up to 2000°F(1093°C).

Protects against corrosion between dissimilar metals.

Resists water, salt solution, most shop and automotive fluids.

Reduces coefficient of friction by a minimum of 20%. "76732 Loctite® functional equivalent"
893560
16oz
 
893661
2oz
 		 DISC BRAKE QUIET

Dampens vibration at caliper/brake pad interface to eliminate brake squeal. Resists diesel fuel, ethylene glycol, water, grease and brake fluid.

ACCESSORIES

PART NO.

 PICTURE DESCRIPTION
89273T
 		 MOUNTING PASTE BRUSH

Heavy-duty mounting paste brush applies paste, compound or liquid products without waste or mess.
89275B
45* Angle 1"
 

TIRE MOUNTING PASTE BRUSH

Tire Mounting paste brackets are manufactured of heavy-duty steel, and fit a variety of tire changing machines.

Heavy-duty mounting paste brushes and cotton swabs apply paste, compound or liquid products without waste or mess.
 
879215

 		 TIRE CRAYON HOLDER

RED

879553
 		 WHITE TIRE PAINT STICK

1/2 Hex

PART NO.

 PICTURE DESCRIPTION
87964
 		 WHITE TIRE PAINT STICK

1/2 Hex

879TLS
 		 TIRE LUBE SWAB COTTON

For All Center Post And Rim Clamp Tire Changers
 
PLUGS / PATCHES

PART NO.

 SIZE PICTURE DESCRIPTION
879214 3/8   30pcs
 		 KEX TEX PLUG
879375

5/8 x 2-7/8

 Patch-N-Plugs
Reinforced for Radial Tires

The radial patch-n-plug vulcanizes to the inner liner and fills the injury. 

Install with 879511 flammable chemical cement. 

Use in conjunction with CC-6, CC-10
Carbide cutters.
 
879382 3/8  
25pcs
 		 PATCH-N-PLUG
879381 3/16
879385 1/8   25pcs

Combi-Units with Pilot Wire

A small diameter steel pilot wire is molded into the plugs on these Combi-Units.

When the wire is pulled through the injury, the plug fills the injury and the patch seals the inner liner.

Install with 879511 flammable chemical cement.

USE IN CONJUNCTION WITH CC-6, CC-10 CARBIDE CUTTERS
879387 1/4
879386 5/16
879388 3/8

PART NO.

 PICTURE DESCRIPTION
879360


 

 Fat Brown String Kit

String, Cement and Tools included
879361


4"  100mm Brown
 

 Posi-Cord String

Rubber impregnated for vulcanization.

Recommended for non-highway service tires only.
879370


7"  178mm Black
 
879322
30pcs
 		 TIRE PATCHES

Radial Round 2-1/4

TIRE VALVES
Snap-In
PART # PICTURE RIM HOLE
DIAMETER

VALVE SIZE

DESCRIPTION
879412 .453 1" Passenger, Light Truck, Enkei Style Valves

Snap In Valves for tubeless passenger and light truck tires.

All valves are equipped with
HI-TEMP valve cores.
879413
 		 .453 1-1/4"
879414
 		 .453 1-1/2"
879415


 

 .625 1-1/4"
879418
 		 .453 2"
879600HP
Hi-Pressure
 		 .453 1-1/4" For light and medium truck applications this 1-1/4" snap-in valve will accept air pressure to 100 lbs. cold inflation.

Fits .453" rim hole.

Caution: Do not use on tire rims that exceed .204 thickness.
 
8796205
 		 3/16 1-7/16" Custom Wheel Valve Chrome
TIRE VALVE CORES

PART NO.

 PICTURE DESCRIPTION
879490
 		 Standard Hi-Temp Valve Core Red

TIRE VALVE EXTENSION CAPS

PART NO.

 PICTURE DESCRIPTION
879583
 		 3/4"
879584
 		 1-1/4
879585 1-1/2
TIRE TOOLS

PART NO.

 PICTURE DESCRIPTION
879160
 		 TIRE SCRAPER

This easy-to-hold scraper can be used on tubes or tire liners to remove contaminants from surface.

Use before buffing to prepare a cleaner bonding surface.
 
879433PRO
 		 TPMS UPRO VALVE SET

Features and Benefits:

 - configures in seconds
 - Coverage of over 90% of direct TPMS
    enabled vehicles
 - 7 year battery life designed for
    optimum compatibility with OE and
    aftermarket wheels 115 psi max
    pressure

 U-Pro Hybrid technology are built with
 preloaded sensor protocols so the
 TPMS diagnostic tool can simply
 ‘activate’ the selected vehicle protocol.
  This results in the tool allowing the
  sensor to be configured in 1- 3
  seconds.
  
879448
 		 TIRE TREAD DEPTH GAUGE

     * Calibrated in mm and 1/32"

    * Quickly and accurately measures
       how much tread is left on a tire

    * Can be used for all types of depth
       measurements
879449
 		 VALVE STEM INSTALLER

For the installation or removing of snap-in type tubeless tire valves
8796005
 

TIRE REPAIR STITCHER
Corrugated

Essential service tool or proper installation or tire repair units, tube repair units and repair plugs.

Durable wooden handle and ball bearing construction provides optimal service life.
 

PART NO.

 PICTURE DESCRIPTION
8796414604
 		 TIRE COMPRESSION TOOL

Type 336/1

Special tool for manual tire bead unseating without auxiliary energy.

The use of this tool allows a safe and quick application of two-piece weights with separate clip.

The design and surface finish of this tool protects tires and rims.

Maximum opening: 13.2“
 
87971510
  		SUPER SCRAPER

One piece composite construction.

Can be hit with a hammer.

Scrape off stickers without scratching paint or glass.
 

PART NO.

 PICTURE DESCRIPTION
879ATS
 		 TIRE SPREADER ADJUSTABLE

Shark C108028

For use on Coats model 4040, 40 FMC 600, 8800

Made in the US
879BW
 		 BUFFING WHEEL

Fine Grit
2-1/2" Diameter
6-8793
 		 TIRE REAMER

Pistol Grip Spiral Cementing Tool
87920008
 		 TPMS RUBBER STEM

 
879311   50pcs

MAGI-CURE CHEM CURING
2-1/2" Blue
Temporary repair