TIMESERT ® MISCELLANEOUS & SPECIAL KITS

APPLICATION

SIZE

KIT P/N

PRICE
INSERT P/N
PRICE
GM cast iron block
stripped Starter bolt thread repair  kit

Stripped Starter bolt
The depth of the starter bolt hole should be 1.200" inches or 30mm Depth minimum. 

Note: This kit can also repair a failed helicoil or coil style insert.

3/8-16

Gm stripped
starter bolt repair kit

Starter Bolt
6601535

Kit includes: Core Drill,
tap , tap guide, Driver, 4 inserts 1" or 25mm

Time-Sert #1535 Starter Bolt Thread Repair Kit
 
   661153501
 
GM Aluminum block
Stripped Starter bolt
thread repair kit

Stripped Starter Bolt
The depth of the starter bolt hole should be 1.500" or
38mm Deep



NOTE:
This kit is for first time repairs ONLY

M10x1.5



GM
Stripped Starter bolt repair kit

Starter Bolt
6601380

Kit includes: Core Drill,
tap , tap guide, Driver,
4 inserts 20mm, 4 sleeves

Time-Sert #1380 Starter Bolt Thread Repair Kit

 
 
   66110153
1.65

Montero crank bolt
Same as below kit with square on drill

Link to repair on 4x4


click for repair

M14x1.5
Short drill
See Note here:
6601415H



Kit includes a shorter drill with a square so you can turn it
with a 1/2" 12 point socket by hand.

 
 
66114159

carbon steel
insert
  2.62
KIA crank shaft bolt thread repair kit where the thread starts flush on the crank shaft on Kia.

M14x1.5

S&D drill
6" long
need
1/2 drill motor

6601415N



Kit includes: Drill, Counterbore
tap , tap guide, Driver,
5 inserts 28mm stainless
 
   661141556

stainless steel
insert
4.91
APPLICATION

SIZE

KIT P/N

PRICE
INSERT P/N
PRICE
M8x1.25

Motorcycle
Swing Arm
Adjustment
Screw Repair Kit

click for repair


 

M8x1.25

kit includes:
coredrill, tap, driver,
5 stainless steel inserts 11.7mm
no flange.

 

6601812ECORE-SS117

Time-Sert #1815 O2-Sensor Thread Repair Kit

Click for larger view
 
181.71 66118122NF
  4.01
M18x1.5
O2 Sensor
Thread Repair
Kit

M18x1.5

kit includes:
Reamer 3.200 inches in length
tap 4.500 inches in length,
tap guide install driver 4.00 inches in length,
5 inserts 7.5mm stainless.
 

6601815SENSOR

Time-Sert #1815 O2-Sensor Thread Repair Kit

Click for larger view
 

365.77

   66118152NF
   9.70
APPLICATION

SIZE

KIT P/N

PRICE
INSERT P/N
PRICE
1/4-28 Special
   66001488

104.64

   661014888
________
 2610546
4.05
Bendix AirCraft Wheel
Oversized
1/4-28 Oversized
use after helicoil pulls out

Must install smaller insert
p/n 661014888 inside oversized insert.
   66001489

195.62
   661014899
________
 2610547
 7.51
Bendix Tools
APPLICATION

SIZE

TOOL P/N

PRICE
 
Bendix Drill
Oversized
 
1/4-28 Oversized
   662014891
13.55
 
Bendix Counterbore
Oversized
 
1/4-28 Oversized
   662014892
42.08
Bendix Tap
Oversized
 
1/4-28 Oversized
   662014893
53.46
Bendix Bottoming Tap
Oversized
 
1/4-28 Oversized
   662014893B
53.46
Bendix Insert Driver
Oversized
 
1/4-28 Oversized
   662014894
42.77
APPLICATION

SIZE

KIT P/N

PRICE
INSERT P/N
PRICE

M10x1.5 30mm
FLUSH SURFACE KIT

The 30mm length insert requires a special driver with reduced shank.

M10x1.5

kit includes:
Drill, counterbore, tap, reduced shank driver,
5 inserts of the 30mm length and tap guide.

6601015D30

Time-Sert Flush Surface Thread Repair Kit M10x1.5


Click for larger view

 

109.37

66110159

2.43

M10x1.5 30mm
FLUSH SURFACE KIT

The 40mm length insert requires a special driver with reduced shank.

M10x1.5

kit includes:
Drill, counterbore, tap, reduced shank driver,
5 inserts of the 30mm length and tap guide.

6601015D40

Time-Sert Flush Surface Thread Repair Kit M10x1.5


Click for larger view

 

129.97
 
 
APPLICATION

SIZE

KIT P/N

PRICE
INSERT P/N
PRICE

ROCKER ARM
M10x1.5 CORE KIT


The core drill included will allow a special 11mm length insert to be installed deeper than the standard kit.

M10x1.5

kit includes:
Coredrill,  tap, driver, tap guide,
5 inserts of the 11mm length.

The mechanic doing the repair will have to set the counterbore depth manually by hand.
 

6601015CORE

Time-Sert M10x1.5 Rocker Arm Core Kit

Click for tool info

151.64

661101511

1.65
APPLICATION
SIZE
KIT P/N
PRICE
INSERT P/N
PRICE

ROCKER ARM
M8x1.25 CORE KIT


The core drill included will allow a special 11.7mm length no flange insert to be installed deeper than the standard kit.

M8x1.25

kit includes:
Coredrill,  tap, driver, tap guide,
5 inserts of the 11.7mm no flange.

The mechanic doing the repair will have to set the counterbore depth manually by hand.
 

6601812CORE

Time-Sert M8x1.25 Rocker Arm Core Kit

Click for
tool info

116.76

66118125117N

1.58
APPLICATION
SIZE
KIT P/N
PRICE
INSERT P/N
PRICE

ROCKER ARM
M8x1.25
BIG-SERT KIT

Oversized Repair

Use after a helicoil has failed


The core drill included will allow a special 11.7mm length Big-Sert insert to be installed deeper than the standard kit.

M8x1.25

kit includes:
Coredrill,  tap, driver, tap guide,
5 inserts of the 11.7mm length.

The mechanic doing the repair will have to set the counterbore depth manually by hand.

BIG-SERT
6601812CORE-BS

Time-Sert M8x1.25 Big-Sert Rocker Arm Kit

Click for tool info

 

173.12

66158121

4.59
APPLICATION
SIZE
KIT P/N
PRICE
INSERT P/N
PRICE

Transmission Pan
M8x1.25 CORE KIT

This kit has a FIXED stop collar for FLUSH repair.

The kit installs the insert flush to the surface in the limited space of the transmission pan
bolt holes.

M8x1.25

kit includes:
Coredrill,  tap, driver, tap guide,
5 inserts of the 11.7mm no flange.

6601812CORE-FL

Time-Sert Transmission Pan M8x1.25 Core Kit

Click for larger view

 

116.76

66118125117N

1.58
APPLICATION
SIZE
KIT P/N
PRICE
INSERT P/N
PRICE

M8x1.25 CORE KIT
Extended
5" length tools

The core drill included will allow a 16.2mm length insert to be installed deeper than the standard kit.

M8x1.25

kit includes 5" length tools:
Coredrill,  tap, driver, 5 inserts of the no flange 16.2mm length.

The mechanic doing the repair will have to set the counterbore depth manually by hand.
 

6601812ECORE

M8x1.25 Time-Sert Core Kit

Click for larger view

171.57

66118125162N

1.58
APPLICATION
SIZE
KIT P/N
PRICE
INSERT P/N
PRICE

M6x1.0
Extended kit


This tooling has no counterbore.
The hole must be at least 8mm or .315 inches for the tap to access the hole.

This kit is typically used in Mercedes injector clamp bolt Thread repair.

Mercedes injector bolt thread repair kit.

M6x1.0

Extended kit
includes:
6" extension drill,
4" tap, 4" driver,
5 inserts of a 17mm length.

6601610E2

Time-Sert Extended Tooling Kit M6x1.0

Click for larger view


commonly used in Dodge sprinter
stripped injector hold down clamp bolt
 

110.50

66116107

  2.33
APPLICATION
SIZE
KIT P/N
PRICE
INSERT P/N
PRICE

DIESEL INJECTOR

M24x2.0

6602420

 Time-Sert Diesel Injector Thread Repair Kit M24x2.0
 

530.74

66124201

13.66
APPLICATION
SIZE
KIT P/N
PRICE
INSERT P/N
PRICE

BIG-SERT
M10x1.5
OVERSIZED

M10x1.5

kit includes:
Drill, counterbore, tap, tap guide, install driver and
5 inserts of the 24.5mm length

6605015D

 Time-Sert Big-Sert M10x1.5 Thread Repair Kit

96.32

66150155

4.75
APPLICATION
SIZE
KIT P/N
PRICE
INSERT P/N
PRICE

M14x1.25
SPARK PLUG
or Drain pan

OPTIONAL TOOLING
FOR 7mm INSERTS

M14x1.25

kit includes:
Drill, counterbore, tap, tap guide, install driver and
5 inserts of the 7mm length
 

66014125D

 Time-Sert M14x1.25 Spark Plug or Drain Pan Kit

128.89

66144121

1.99
APPLICATION
SIZE
KIT P/N
PRICE
INSERT P/N
PRICE
NAVISTAR DPF
M12x1.25
66012-235-02

M12x1.25

 

66012-235-02
DPF sensor thread repair

 

 

66112-235-02-06

 
Used to renew stripped-out temperature and pressure sensor threads on DOC/DPF units.

2007 MaxxForce 10, 2007 MaxxForce 11, 2007 MaxxForce 13, 2007 MaxxForce 7, 2007 MaxxForce 9,
2007 MaxxForce DT, 2010 MaxxForce 10, 2010 MaxxForce 11, 2010 MaxxForce 13, 2010 MaxxForce 15, 2010 MaxxForce 7, 2010 MaxxForce 9, 2010 MaxxForce DT, 9000i Series, AC / UC & HT / TC Commercial Bus, AE, BE, CE & Integrated Bus, DuraStar, LoneStar, N13 (SCR, EPA10,HD-OBD), PayStar, ProStar,
RE Integrated Bus, TerraStar, TranStar, WorkStar
 
APPLICATION
SIZE
KIT P/N
PRICE
INSERT P/N
PRICE

NAVISTAR DPF
M14x1.5
66012-235-03

M14x1.5
 

66012-235-03
DPF sensor thread repair

 

66112-235-03-06