ADHESIVES

8901628

 
16 oz Aerosol

CASTLE® HOLD TITE
Castle® Hold Tite™ is a gasket adhesive that will hold even the largest gasket in place, as well as sealing hoses and thread fittings. Hold Tite™ is fast setting, but allows for reposition if necessary to assure perfect fit. The thermal stability of Hold Tite™ ranges from -70° F to 500° F.
Uses:
All types of gaskets, including metal, cork, rubber, and paper.
Directions:
See package for specific directions.
 
8902006

 
20 oz Aerosol

CASTLE® TRIM STICK™
Castle® Trim Stick™ spray adhesive features a professional formula with strength for binding vinyl, leather, plastic, foam, metal, wood, corrugated, and other similar surfaces. Castle® Trim Stick™ becomes tacky almost immediately, yet allows for repositioning for up to 2 hours after application. Trim Stick™ also works well in all temperature ranges.
Uses:
Seal Boxes Headliners Carpets
Gasket Adhesives
Directions:
1. Shake product well before using.
2. Spray, holding Trim Stick™ 6-8 inches from surface.
3. Be sure to spray both surfaces.
4. Let set for 60 seconds before mounting.
5. When done, clear out by inverting can and spraying until valve is clear.
 
8902041

 
20 oz Aerosol

CASTLE® BIG STICK™
VOC-compliant Castle® Big Stick™ heavy duty spray adhesive features a super strength formula that dries fast and creates a permanent bond the first time, every time. Use to bond vinyl, leather, foam, rubber, plastic to wood, metal, or cardboard. In addition to being water and heat resistant, Big Stick™ will not attack foam. Its adjustable spray nozzle allows for application in any direction. Big Stick™ contains no methylene chloride.
Uses:
Bonding various materials.
Directions:
Surface must be clean and dry. Working surface
and can must be at room temperature (60°-65°F).
Protect areas from overspray.
Adjust nozzle to desired width and direction.
Hold can 5”-7” from surfaces and spray both surfaces to be bonded with an overlapping motion.
Allow solvent to escape for 2-3 minutes, but not more than 15 minutes.
Encourage bonding by applying firm pressure.
When finished, invert can and spray to clean nozzle.
8911514

 
11oz Cartridge
 

Urethane Adhesive Sealer


A fast tacking contact adhesive formulated to quickly
reattach body side moldings and emblems.
Heat resistant .  
Black
891622


1oz Bottle
 

Quick-Weld #2 High Viscosity Super Glue

Color: Milky

A high viscosity (thicker), cyanoacrylate adhesive. Used to bond irregular surfaces or when gap filling requirements are needed. Cures to a film strength of 5000 PSI.
 

891631


 

Quick-Weld Adhesive Kit

An excellent cyanoacrylate repair adhesive kit for most plastics, urethane, SMC and fiberglass.

Used on grilles, knobs, mouldings, emblems and countless other automotive plastic parts.

Includes:
1 QUICK-WELD #1
1 QUICK-WELD #2
1 QUICK-SET ACTIVATOR

891650


4oz Spray Pump Bottle
 

Quick Set Activator

Color: Black

Used to activate QUICK-WELD adhesives or other
instant adhesives. Can also be used to prime one
of the mating surfaces to insure a successful bond.
Can also be used to spray over a bonded area for
a quick set.
891670


Kit contains:

One  .50 fl. oz. Adhesive
One  .50 fl. oz. of Primer

 

Stik-Upp
Rear View Mirror Adhesive

For mounting rear view mirrors to windshields. Mounts
over 200 mirrors!

 
8911810
1-Qt

6 Case
 

 

Inter-Bond Low VOC Adhesion Promoter

Color: Black

Designed to improve adhesion and help prevent paint peeling on new unfinished plastic parts and previously painted surfaces. It modifies the surface properties of “difficult” polyolefin plastics like polypropylene, TPO, TPE, EDPM and other plastics, creating a tie coat between the plastic and the top coat. Works equally well on fiberglass, aluminum, vinyl, galvanized metal and painted surfaces.
 

8911811
1-Gal

4 Case
8911815
1qt


4 Case

 

INTER-CLAD “DOUBLE-DUTY” 1K ADHESION
PRIMER & SEALER

A 2 in 1 elastomeric coating that facilitates adhesion to TPO, TEO and PP substrates. Has a built in adhesion promoter that saves you time and money. Topcoat can be applied without the need of sanding or scuffing as soon as it is dry. Ideal for easy refinishing of new unprimed OEM replacement bumpers as well as reconditioned bumpers

8911816
1gal

1
Case
 
8914004


 

Auto Glass Butyl Tape
1/4"
8914010


 

Auto Glass Butyl Tape
5/16"
8914016


 

Auto Glass Butyl Tape
3/8"
8914022


 

DamTape
3/8 x 1/4 x 15"
Black
8914503


20 fl oz Aerosol
 

Spray Adhesive

Fast tacking cement for use on cork, rubber, paper and metal gaskets. Used for holding gaskets in place during assembly. 
Long tack time. High heat resistance.  High strength. Sprays evenly.
892100045


16oz Aerosol
 

Muffler Cement

Effective for sealing exhaust joints subject to elevated temperatures

Ideal for "out-of-round" muffler and pipe connections

Cures in minutes
892100049


Hylomar
Blue Medium 3.5 Oz Tube & Nozzle
 

Gasket Maker / Gasket Dresser / Thread Sealant

Hylomar ® is a polyester polyol–based compound that turns from a gel into flexible putty within minutes of application. Originally developed by Rolls Royce, where it performed under the most stringent aerospace tolerances,  Hylomar brings superior qualities to automotive applications. Its non-hardening formula maintains seal integrity even when subjected to thermal distortion and vibration.

892100050

  
Hylomar
5oz Aerosol

Color: Blue
 

8921007


4oz

Fix-it Quick

Fix-it Quick will plug or seal practically anything that leaks, it will patch holes and cracks, mend almost anything that is broken. It is excellent for rebuilding or fabricating parts and as an all purpose adhesive for metals, wood, glass, masonry, ceramics and many plastics. Also, it can be drilled, tapped, filed, sanded and painted like metal. Sets steel hard in 20 minutes.
 
892380


1oz
 

Loctite 380 Black Max

LOCTITE® 380 is a rubber toughened adhesive with increased flexibility and peel strength along with enhanced resistance to shock.

TYPICAL PROPERTIES OF UNCURED MATERIAL. Specific Gravity @ 25 °C. 1.1.
89239123


0.14 ounce bottle
 

Loctite 39123 Quicktite Super Glue Gel
Instant Adhesive


Instant adhesive with clog-free, precision control applicator. No-run formula. Ideal for porous surfaces and vertical applications.
 
892404


1 gal
 

Bondo Fiberglass Resin
Clear


Special formula allows for faster bond on more surfaces
892404H


11 ml
 

Bondo Liquid Hardener

For use with Bondo® polyester fiberglass resin and other resins
892411


2gr
 

Permatex Super Glue

Special formula allows for faster bond on more surfaces
892412


2gr
 

Pro Seal Future Glue Gel

Stronger than Super Glue Thick No Run Formula
Sets in Seconds Holds Over 2 Tons
8926000


3.7oz
 

E6000®
Adhesive Hi Viscosity

Industrial strength, non-flammable adhesive that provides versatility not found in silicones and rubber cements.  Safe for applications exposed to dilute acids
and dilute caustics.  Maintains a flexible bond in cold temperatures and may be used to bond items subject to vibration.  Exceptional adhesion to wood, metal, glass,
fiberglass, ceramics, masonry and concrete.
 
892648


1oz
 

Loctite 648
 
LOCTITE 648 is a low viscosity, high strength retaining compound with high temperature resistance. Ideal for retention of parts with a clearance or interference fit.
LOCTITE® 648 is a green, fluorescent, low viscosity, high strength, urethane methacrylate acrylic, anaerobic retaining compound designed for bonding cylindrical fitting parts. It prevents loosening and leakage from shock and vibration. Typical applications include holding gears and sprockets onto gearbox shafts and rotors on electric motor shafts. It provides robust curing performance. LOCTITE® 648 is a green, fluorescent, low viscosity, high strength, urethane methacrylate acrylic, anaerobic retaining compound designed for bonding cylindrical fitting parts. It prevents loosening and leakage from shock and vibration. Typical applications include holding gears and sprockets onto gearbox shafts and rotors on electric motor shafts. It provides robust curing performance.
 
  • Fluorescent
  • Low viscosity
  • High strength
  • Designed for bonding cylindrical fitting parts
  • Works on active metals (e.g. mild steel) as well as  __passive substrates such as stainless steel and __plated surfaces
  • Offers high temperature performance and oil   __tolerance
  • Tolerates minor surface contaminations from various __oils such as cutting, lubrication, anti-corrosion and __protection fluids
  •     
     
    8928265
    2 oz J-B Weld Dual Tube   Original Cold Weld Formula Steel Reinforced Epoxy

    Working Time:          30 min
    Color:                         Gray
    Physical Form:          Paste
    Flashpoint:                >200[DEG]F
    Fixture Cure Time:   15 - 24 hr
    Temperature:            500[DEG]F
    Tensile Strength:      3960 PSI
     
    Notes:
    Withstands up to 600[DEG] F. Takes 16-24 hours to cure. Once cured you can paint, sand, drill & tap. Will adhere to metal, copper, steel, wood, concrete, marble, and fiberglass. Also, bronze, porcelain, ABS & PVC plastics. Compressive strength 10,733 PSI. Flexural strength 7,320 PSI.

       892942 1 oz  Epoxy Syringe
     
    A rapid curing, general purpose adhesive. It bonds rigid, durable substrates such as metals, ceramics, glass, concrete and wood in all combinations. Ideal for repairs in the workshop, automobile, garage, industry and household. It forms a clear, hard, rigid, bonding coating in minutes. Pre-measured
    syringe assures proper mix for consistent results.
    892QB2
    2 - 10ml Bottles Adhesive
    With Black And Gray Filling Powders
    Q Bond QB2 Quick Bonding Adhesive Kit   Q-Bond Adhesive Kit.

    Repair nearly anything from your favorite antique knick-knack to a plastic cup with the

    Use it as a stand-alone adhesive or add the reinforcing powders that will help to repair almost anything.

    The Q-Bond repair kit includes two bottles of adhesive (0.35oz/10ml), one bottle of black reinforcing powder for plastics and 1 bottle of grey reinforcing powder for metals.

    The ultra-strong bonding adhesive and reinforcing powders become rock solid in just 10 seconds. Once set and solid, you have the option to grind, file, sand and even paint your repaired object. No need to fret when you break your favorite vase or picture frame: The Q-Bond adhesive kit can help you put the pieces back together.
    893351
    16oz Brush-Top

    Permatex® Aviation Form-A-Gasket®
    No. 3 Sealant Liquid
    Brush-Top

    Slow-drying, non-hardening brush-top sealant approved for use in aviation as well as automotive applications. Temperature range -65°F to 400°F  (-54°C to 204°C); resists gasoline, oil and grease.

      89337393
    2gm Tube
    Loctite Plastix Advanced Plastic Bonder

    Loctite® Plastix® Advanced Plastic Bonder advanced automotive aftermarket plastic repair. No mixing required.

    Prepare the surface with the activator, apply the bonding agent, and bond the parts. Suggested applications: All plastics, even polyethylene and polypropylene.
    89338725
    5 Sticks Loctite Thread Treatment Sticks Kit

    Loctite® Plastix® Advanced Plastic Bonder advanced automotive aftermarket plastic repair. No mixing required.

    Prepare the surface with the activator, apply the bonding agent, and bond the parts. Suggested applications: All plastics, even polyethylene and polypropylene.
    893401
    6ml Bottle Dynatex Rear View Mirror Adhesive

    A rapid curing, general purpose adhesive. It bonds rigid, durable substrates such as metals, ceramics, glass, concrete and wood in all combinations. Ideal for repairs in the workshop, automobile, garage, industry and household. It forms a clear, hard, rigid,
    bonding coating in minutes. Pre-measured syringe assures proper mix for consistent results.
    893403
    3 Gram Bottle

    Dynatex Super Glue
    Instantly bonds glass, metal, plastics and rubber. Bonds close fitting parts in seconds. Works on aluminum, copper, brass, steel, vinyl, PVC, polyester, nylon, fiberglass and wood.

    Holding strength to 5000 PSI.

      8928011
    5oz Color: Black
     
    Weatherstrip Adhesive

    Flexible yellow and black rubber based adhesives. Bonds all types of gaskets and weatherstrip to painted or unpainted metal surfaces.  Resists oil, grease and solvents.

    Extremely fast drying.  Exceptional bonding strength
    Waterproof.