SILICONE
E-Z Bead RTV
BLUE
CLEAR
8900808
BLACK
RTV Silicone Gasket Maker 8oz
Now with the new E-Z Bead Power Pack™ dispenser, you can make any size, any shape gasket with just the press of a finger.
Castle® E-Z Bead™ is dispensed through a pressurized can for a clean, smooth, continuous bead of any size.
E-Z Bead’s RTV™ Silicone makes a permanent flexible seal for a multitude of uses.
Special formulations are designed for specific applications.
E-Z Bead’s Innovative applicator allows easy application of RTV Silicone to any surface even when applying to overhead or vertical surfaces.
It eliminates package waste of product due to poor closure of traditional squeeze tubes of caulking guns that become hard after
one use.
Castle® E-Z Bead Black™ will withstand constant temperatures from 75° F to 450° F.
Used for valve covers, oils pans, thermostat housing, water pumps, timing gears, oil pumps, transmission pans, and axle covers.
Do not use for head gaskets, Intake/exhaust manifold, or carburetor base.
E-Z Bead™ will affect oxygen sensors.
8oz
BLACK
LOW VOLATILE™
E-Z Bead™ High TempRed
Castle® E-Z Bead Red™ is designed for high temperature gasket applications.
It will perform at temperatures ranging from -85° F to over
600° F.
Exposure to these higher limits, however, should be for intermittent periods only.
Used for high temperature cam and timing chain covers, cross over manifolds, and exhaust manifolds.
It can also be used for all regular gaskets and sealing applications. E-Z Bead™ will affect oxygen sensors.
9oz
BLACK
LOW VOLATILE™
E-Z Bead Black Low Volatile™
Castle®E-Z Bead™ is dispensed through a pressurized can for a clean, smooth, continuous bead of any size.
E-Z Bead’s RTV™ Silicone makes a permanent flexible seal for a multitude of uses.
Special formulations are designed for specific applications.
E-Z Bead’s Innovative applicator allows easy application of RTV Silicone to any surface even when applying to overhead or vertical surfaces.
It eliminates package waste of product due to poor closure of traditional
squeeze tubes of caulking guns that become hard after one use.
Castle® E-Z Bead Black™ will withstand constant temperatures from -75° F to 450° F.
Used for valve covers, oils pans, thermostat housing, water pumps, timing gears, oil pumps, transmission pans, and axle covers.
Do not use for head gaskets, intake/exhaust manifold, or carburetor base.
E-Z Bead™ will affect oxygen sensors.
9oz
GRAY
E-Z Bead Import Gray™ High Torque Fast Cure Silicone
|
E-Z Bead Import Gray™ High Torque Fast Cure Silicone is a medium density RTV Sealant and Gasket maker.
E-Z Bead Import Gray™ offers high viscosity, quick cure and rapid turnarounds demanded by import dealers and repair facilities. EZ Bead Import Gray™ dries tack free in about 8 minutes and has a cure rate between 2-6 hours (depending on thickness and atmospheric conditions). E-Z Bead Import Gray™ high torque rating makes it ideal for use on 4 and 6 cylinder engines with close bolt spacing on rocker covers, oil and transmission pans. E-Z Bead Import Gray™ is hot oil resistant and is unaffected by most fluids found in imported cars and trucks. This product is effective in temperature range of -40°F to 600°F (intermittent to 650°F). |
|||||
|
8oz
Castle® Silicone Dielectric Compound
Castle® Silicone Dielectric Compound™ is formulated to lubricate and protect certain electrical connections.
Heat and high voltage create problems when it’s time to replace spark plugs and wires.
Boots tend to soften, and light bulbs dry out and stick, sometimes breaking off.
Castle® Silicone Dielectric Compound™ helps prevent this from happening.
|
||||||||
8oz Aerosol
RED
|
Castle® E-Z Bead™ is dispensed through a pressurized can for a clean, smooth, continuous bead of any size.
E-Z Bead’s RTV Silicone™ makes a permanent flexible seal for a multitude of uses. Special formulations are designed for specific applications. E-Z Bead’s™ Innovative applicator allows easy application of RTV Silicone to any surface even when applying to overhead or vertical surfaces. It eliminates package waste of product due to poor closure of traditional squeeze tubes of caulking guns that become hard after one use. Castle® E-Z Bead Supreme™ is the ultimate gasket maker in our Hi- Temp power pack. Supreme represents the most advanced technology in RTV silicone today. E-Z Bead Supreme™ RTV silicone is high temperature, low odor, low volatile, non-corrosive, resistant to hot oil and glycol. It has superior, non-leak characteristics. E-Z Bead Supreme™ will withstand temperatures form -85°F to 550°F. Supreme will not affect oxygen sensors. |
||||||||
|
||||||||
|
8oz Aerosol
CHEEZ WIZ
BRAKE LIFE
|
Castle® Brake Life™ non-curing silicone lubricant is a grease-like formula that combines an inert amorphous silica filler with selected polydimethyl silicone fluids. This product has excellent dielectric properties; is very water repellant, resists oxidation, and is essentially non-toxic and non-melting. Brake Life™ shows very little tendency to dry out. It is nonvolatile, resistant to a wide variety of chemicals, and is excellent for lubricating rubber and plastic components. |
||||||||||||||
|
||||||||||||||
7.25 oz
RED
RTV Silicone Sealant
A specially formulated gasket sealant for automotive, marine and industrial applications.
Full-bodied, will not sag or run.
Replaces rubber and cork gaskets.
Sensor safe.
High temp. range: 500°F.
Remains flexible, skins over rapidly.
Packaged in a 7.25 oz. Auto-Tube. The Auto-Tube dispenses an even 1/8" bead of silicone and is faster than standard tubes.
Advantages include 95% evacuation and superior flow control.
7.25 oz
BLACK
20oz
| Castle® Big 5™ | |||||||||||
| The super high viscosity formula of Castle® Big 5™ contains 99.1% pure silicone. This is a universal spray lubricant is excellent for solving problems regarding sticking, binding, squeaking, and lubrication. A 360° nozzle allows this product to be sprayed upside down. | |||||||||||
|
|||||||||||
|
8oz Brush-Top
SLC Silicone Lubricating Compound
A transparent, heavy consistency silicone grease.
Reconditions rubber and vinyl.
Can be used on: electrical connections as a dielectric grease, fan belts, rubber brake parts,
o-rings, etc.
13oz
Permatex® Ultra Grey® Rigid High-Torque RTV Silicone Gasket Maker
OEM specified. Permatex® Ultra silicones were developed to meet today s technology changes.
Sensor-safe, low odor, non-corrosive.
Outstanding oil resistance and joint movement tolerance.
Eight times more flexible than cork/composite gaskets; three times more oil resistant than conventional silicones.
Temperature range -65ºF to 500ºF (-54°C to 260°C) intermittent; resists auto and shop fluids and vibration.
Automobile
Suggested Applications: Valve covers, oil pans, automatic transmission pans, intake manifold end seals, timing covers, water pumps, thermostat housings
Heavy Duty
Suggested Applications: Cover housing gasket, differential, assembly to rear axle housing, power dividers, axle shaft flanges
3oz Tube
Permatex Ultra Copper Sensor Safe
High-Temp RTV Silicone Gasket Maker
Permatex® Ultra Copper® Maximum Temperature RTV Silicone Gasket Maker OEM specified.
For high operating temperatures common in 4-cylinder, turbocharged or high-performance engines.
The most advanced, high temp RTV silicone gasket available. Sensor-safe, low odor, non-corrosive.
Superior adhesion.
Three times more oil resistant than conventional silicones; eight times more flexible than cut gaskets.
Temperature range -65°F to 700°F
(-54°C to 371°C) intermittent; resists auto and shop fluids and vibration.
3oz Tube
Permatex Ultra Black® Maximum Oil Resistance RTV Silicone Gasket Maker
OEM specified.
For dealership warranty requirements, Ultra Black® ensures extended drive train warranty compliance.
Fast-curing formula. Sensor-safe, low odor, noncorrosive.
Meets performance specs of OE silicone gaskets. Retains high flexibility, oil resistant properties through use of a patented adhesion system.
Temperature range -65°F to 500°F (-54°C to 260°C) intermittent; resists auto and shop fluids and vibration
3.5oz Tube
Permatex Ultra Grey® Rigid
High-Torque RTV Silicone Gasket Maker
OEM specified.
Permatex® Ultra silicones were developed to meet today’s technology changes. Sensor-safe, low odor,
non-corrosive.
Outstanding oil resistance and joint movement tolerance.
Eight times more flexible than cork/composite gaskets; three times more oil resistant than conventional silicones.
Temperature range -65?F to 500?F (-54°C to 260°C) intermittent; resists auto and shop fluids and vibration.
7oz Power Can
Permatex The Right Stuff® Gasket Maker
Make leak-proof gaskets and return equipment to service immediately! Permatex’ premier instant gasket maker was designed as a replacement for conventional gaskets.
This elastomeric
“formed-in-place"material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion.
Formulated to meet or exceed performance standards for long-term sealability, durability and handling, this material is used on OEM production lines and specified in their service parts programs.
Temperature range -75°F to 450°F (-59°C to 232°C) continuous, 500°F (260°C) intermittent; resists ATF, coolant, oil and other shop fluids.
Sensor-safe.
Fleet-tested
7oz Power Can
with Caulk Gun
5 fl oz Cartridge
Loctite® Ready Gasket
Loctite® Ready Gasket makes high performance leak proof gaskets in one minute.
This elastomeric rubber gasket technology is blowout resistant, sensor-safe and outperforms
pre-cut gaskets.
Equipment can be returned to service immediately.
Specified on production lines by GM, Ford,
Daimler-Chrysler.
Temperature range:
-75 degrees F to 450 degrees F
(-60 degrees C to 232 degrees C) continuous,
500 degrees F (260 degrees C) intermittent;
resists ATF, coolant, oil, and other shop fluids.
Protects against leaks caused by vibration and thermal expansion.
5 fl oz
DynaPlus Fast Cure Gasket Maker is a "thicker" elastomeric rubber used by technicians to replace gaskets.
DynaPlus is manufactured to meet or exceed OEM specs as well as being sensor safe.
DynaPlus offers greater gasket "blowout" resistance and problems due to vibration.
Designed to provide increased resistance to oil, water, anti-freeze, transmission fluid and many other shop fluids.
Use on valve covers, transmission pans, oil pump flanges, timing gear and differential covers, water pumps and much more.
Temperature resistant up to 5007deg;F (260°C).
29208/85224 Permatex® Right Stuff® functional equivalent"
5.36oz Tube
Brake System Silicone Compound
A silicone based lubricant that protects rubber and plastic gears. Contains NO petroleum or by-products.
Locks out moisture and has excellent wash-away resistance. Unaffected by extreme temperatures from
-40°F to 500°F.
Prevents drying and cracking. Recommended by major brake installer chains, fleets and brake manufacturers
100gm Tube
Dirko Dictmasse
RTV Silicone Gasket Maker Compound
7.25 Oz Power Can
Pro Seal Black Instant Gasket
Replaces Pre Cut Gaskets For A Reliable Seal On Exhaust Manifolds, Timing Chain Covers, And Most Other High Temperature Applications.
RTV Silicone Instant Gasket
Low VOC
Black
Temp Range -75 to 500 F
Specific Gravity 1.04
Viscosity Paste
Flash Point Greater Than 250 F
Functional Cure 24 Hours
Application Time 10 Min
Substrates Metal
Forms Flexible And Crack Resistant Seal
3 Oz Tube
Black Gasket Maker
Low Volatile
Formulated for gasket making applications
Sensor safe and manufactured to meet OEM specifications
Makes instant, leak-proof gaskets for all engines, drive train equipment and related components.
Temperature resistant up to 500°F (260°C).
Resists oil, water, anti-freeze and transmission fluid.
Cures tough and flexible.
Withstands the harsh conditions of GEAR OIL, especially with differentials and transfer cases.
Works on all vehicles.
3 Oz Tube
Red Gasket Maker
Low Volatile High Temp
Formulated to withstand higher operating temperatures
Sensor-safe and manufactured to meet OEM specifications.
Resist cracking and migration caused by thermal cycling.
Will not leak.
Temperature resistant up to 650°F (343°C).
Resist oil, water, anti-freeze and transmission fluid.
Withstands the harsh conditions of GEAR OIL, especially with differentials and transfer cases.
3 Oz Tube
Clear Adhesive Sealant
Low Volatile
Provides transparent, watertight silicone
rubber seal for a wide range of applications.
Bonds and seals metal, plastics, glass,
fabric, vinyl, wood and rubber.
Use on windshields, sunroofs, tail lights,
interior panels, fire walls and dashboards.
Cures at room temperature.
3 Oz Tube
Permatex® Sensor-Safe Blue Gasket Maker
OEM specified.
The original Permatex Blue now with low odor formula.
Will not foul oxygen sensors.
Replaces almost any cut gasket.
Makes reliable “formed-in-place” gaskets that resist cracking, shrinking and migrating.
Coats pre-cut gaskets to increase reliability.
Temperature range -65°F to 500°F (-54°C to 260°C) intermittent; resists auto and shop fluids.
300ml Cartridge
Red Gasket Maker
Low Volatile High Temp
Formulated to withstand higher operating temperatures.
Sensor-safe and manufactured to meet OEM specifications.
Resist cracking and migration caused by thermal cycling.
Will not leak.
Temperature resistant up to 650°F (343°C).
Resist oil, water, anti-freeze and transmission fluid.
Withstands the harsh conditions of GEAR OIL, especially with differentials and transfer cases.
300ml Cartridge
Blue Gasket Maker
Low Volatile
Replaces most cut gaskets. Sensor safe and manufactured to meet OEM specifications.
Resist cracking, shrinking and migration caused by thermal expansion.
Cures tough and flexible.
Temperature resistant up to 500°F (260°C).
Resist oil, water, anti-freeze and transmission fluid.
For valve covers, oil pans, transmission pans, rear-end housings, timing chain covers, thermostat housings, water pumps and oil pump flanges.
Withstands the harsh conditions of GEAR OIL, especially with differentials and transfer cases.
300ml Cartridge
Black Sealant
General purpose high quality 100% RTV Silicone Sealant.
Cures at room temperature to a tough and flexible rubber.
For caulking, sealing, waterproofing and bonding.
Seals and bonds terminals, connectors, mounting fixtures, mechanical gaskets, glass, metal, masonry, plastic, tile, rubber, wood and fabric.
6.42oz
Permatex® Ultra Grey® Rigid High-Torque
RTV Silicone Gasket Maker
OEM specified.
Permatex® Ultra silicones were developed to meet today’s technology changes.
Sensor-safe, low odor, non-corrosive.
Outstanding oil resistance and joint movement tolerance.
Eight times more flexible than cork/composite gaskets; three times more oil resistant than conventional silicones.
Temperature range -65?F to 500?F (-54°C to 260°C) intermittent; resists auto and shop fluids and vibration.